One car that particularly caught our eye with its angular lines is the Ferrari Dino 308 GT4. We have endeavoured to replicate these details in the design of the Wedge handles.

Wedge Lever & Back Plate - Turn & Release

FINISHING

Wedge Lever Handle & Plate

Wedge Lever & Back Plate - Euro Cut Out (268mm)

Wedge Thumb Turn - Round Ringed Rose

Wedge Thumb Turn - Square Stepped Rose

Wedge Espagnolette Window Handle (Handed)

Wedge Lever Handle

Wedge Single Door Pull

Wedge Cabinet Handle

Wedge Thumb Turn - Round Rose

Wedge Casement Window Handle (Handed)

Wedge Cabinet Pull

Wedge Pair of Door Pulls

Wedge Thumb Turn- Minimalist Rose

Wedge Lever Handle- Minimalist Rose

Wedge II Lever Handle

Have a general question or need help with a specific project or product? Please contact Joseph Giles by filling out a quick form.

General Enquiry

Our CPD sessions are designed to be delivered face to face, however we will try to accommodate online sessions on a case by case basis.

Book a CPD

All samples supplied will be invoiced and credited in full when returned in fully saleable condition in the original packaging, due to the high value of these products.

Request a Sample

What can we help you with?

email

New form (February 26, 2025 11:32:30 AM GMT)

Register a Project

project_reference_dealers

delivery_deadline

project_address

specifier

If possible, please include the product code, size, finish and quantity.

product_details

Register a Project - Joseph Giles Partner

firstname

lastname

Cabinet & Joinery Hardware - Landing Page Lead Form

i_m_interested_in___

i_am___

company

country

phone

how_did_you_find_us_

message

Joseph Giles is committed to protecting and respecting your privacy, and we’ll only use your personal information to administer your account and to provide the products and services you requested from us. From time to time, we would like to contact you about our products and services, as well as other content that may be of interest to you. If you consent to us contacting you for this purpose, please tick below to say how you would like us to contact you:

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

In order to receive your enquiry, we need to store and process your personal data. If you consent to us storing your personal data for this purpose, please tick the checkbox above and you will then be able to submit this form.

New Site (ON) Contact Us

Shelving System (register interest)

Before we create a trade account for you so you're able to access prices, lead times and technical drawings, we just need some information from you. If you have any questions, please give us a call on +44 (0)20 8680 2602.

jobtitle

company_number_vat_number

company_website

street_address

post__zip__code

New Create Account form (January 8, 2024 3:18:34 PM GMT)

cpd_type

name

address

New Site - Book a CPD

New Shelving System (coming soon) form - landing page

Joseph Giles needs the contact information you provide to us to contact you about our products and services. You may unsubscribe from these communications at any time. For information on how to unsubscribe, as well as our privacy practices and commitment to protecting your privacy, please review our Privacy Policy.

New Site Newsletter Form (ON)

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.&#xa0;

In order to receive your enquiry, we need to store and process your personal data. If you consent to us storing your personal data for this purpose, please tick the checkbox above and you will then be able to submit this form.&#xa0;

New Site (ON) General Enquiry

Humphrey Munson Design Request

product_type

product_sizes

expected_order_quantities

Please share what you think is a realistic price point per piece.

realistic_price_point

additional_details

Humphrey Munson Design Requests

"Lever Handles for Hotels" - Salto PDF download

project_reference_1

how_soon_do_you_need_your_hardware_

what_is_your_budget_for_hardware_

product_data

New Site (ON) Make An Enquiry 

New Site - Book a CPD - Website Version

subject

Please tell us a bit more about you and why you are interested in joining the team.

content

New Site Careers

slug

download_type

Website Download Form

type_of_enquiry

delivery_country

samples

New Site (ON) Request a Sample

product_code_contact_form_old_site

product_quantity_contact_form_old_site

project_reference

enquiry_details_contact_form_old_site

Contact Us form for Old Website

Inspired by the slender forms of classic car aerodynamics, and the angular lines of the Ferrari Dino 308 GT4.

The Wedge Collection

Inspired by the slender forms of car aerodynamics, the Wedge pays homage to the classic car manfacturing of the 1950s-70s, when vehicles were made by hand, with carefully considered and crafted details. 

One car that particularly caught our eye with its angular lines is the Ferrari Dino 308 GT4. We have endeavoured to replicate these details in the design of the Wedge handles. 

We are thrilled to partner with internationally recognised interior designer Anca Rotaru on exciting new products.

Ferrari Dino Wedge Inspiration

The design story

Ferrari Dino Wedge Inspiration - Website Banner Crop

The Wedge ll door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles come with the unique JG sprung bearing grip tight inner roses.​ *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)
</li><li>One pair of decorative cover roses (four pieces, two plates which fix to the door, and two covers)
</li><li>One pair of unique JG sprung bearing grip tight inner roses** (two pieces, 1 left-handed and 1 right-handed)
</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below.

The Wedge door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles come with the unique JG sprung bearing grip tight inner roses.​ *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)
</li><li>One pair of decorative cover roses (four pieces, two plates which fix to the door, and two covers)
</li><li>One pair of unique JG sprung bearing grip tight inner roses** (two pieces, 1 left-handed and 1 right-handed)
</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below.

Wedge III Lever Handle

The Wedge door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles are supplied with the unique Joseph Giles sprung bearing grip tight inner roses. *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)</li><li>One pair of decorative cover long backplate roses with euro cutout (four pieces – two plates which fix to the door and two covers)</li><li>One pair of unique Joseph Giles sprung bearing grip tight inner roses** (two pieces – 1 left-handed and 1 right-handed)</li><li>One set of special magnetic fixings for the lower part of the backplate</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick.</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below.

The Wedge door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. 
 All our lever handles are supplied with our innovative minimalist rose fitting. The minimalist roses enable the full purity of the handle design to be appreciated; however, the minimalist rose does not come with the benefits of the JG sprung bearing grip tight inner roses. These handles will need to be installed by very skilled joinery craftsmen. 
 Pair of lever handles includes: 
<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)
</li><li>One pair of minimalist roses (designed to be recessed into the door)
</li><li>One set of fixings for lever handles which include washers, grub screws, an Allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12") thick
</li></ul> **Please note, levers with a minimalist rose cannot be used as a single operating lever or dead fixed singularly.**
 For technical help regarding our lever handles, please refer to our technical help sheet below.

The Wedge door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles are supplied with the unique Joseph Giles sprung bearing grip tight inner roses. *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)</li><li>One pair of decorative cover long backplate roses (four pieces – two plates which fix to the door and two covers)</li><li>One pair of unique Joseph Giles sprung bearing grip tight inner roses** (two pieces – 1 left-handed and 1 right-handed)</li><li>One set of special magnetic fixings for the lower part of the backplate</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick.</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below.

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied as a pair for either glass or timber doors (a single-sided version is also available).&nbsp;The standard back-to-back fixings for timber doors will suit doors up to 54mm (2.12”) thick.The standard back-to-back fixings for glass doors will suit doors 10-12mm thick.&nbsp;Please see our help sheet below for more technical information.&nbsp;Included in a pair of back-to-back pull handles:<ul><li>2no Door pull handles</li><li>1no Fixing pack with specialist bolts, grub screws and an allen key</li></ul>

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied individually for single-side applications.&nbsp;The standard bolt-through fixings for timber doors will suit doors up to 54mm (2.12”) thick.&nbsp;Included in a single-sided pull handle for timber doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li></ul>&nbsp;Please see our help sheet below for more technical information.

The Wedge door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles come with the&nbsp;unique JG sprung bearing grip tight inner roses.​ *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)
</li><li>One pair of decorative cover roses (four pieces, two plates which fix to the door, and two covers)
</li><li>One pair of unique JG sprung bearing grip tight inner roses** (two pieces, 1 left-handed and 1 right-handed)
</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below.

Wedge door hardware

This solid brass casement window handle with concealed fixings is available in both left-hand and right-hand variations, with 2 tab length options for varying frame details. Supplied with a mortice receiver plate and the necessary fixings. A hook plate (WN1093) can be supplied separately if required. Supplied singularly and available in all our signature finishes.

Our espagnolette window handle uses concealed fixings for use with hidden espagnolette mechanisms with 7mm spindle followers. It is available in left-hand and right-hand variations, made from the finest grade solid brass, and available in all our signature finishes. Supplied with M5 fixings to suit the standard 43mm cc holes on most espagnolette mechanisms.

Wedge window hardware

The Wedge cabinet handles are made from the finest grade solid brass. They are available in two sizes and all our signature finishes. They are supplied as single items with solid brass M4 fixing bolts (FT1030) in a matching finish.

The Wedge cabinet pulls are made from the finest solid brass. They are available in two sizes and all our signature finishes. They are supplied as single items with solid brass M4 fixing bolts (FT1030) in a matching finish.

Product Category