To achieve the eye-catching texture, heated brass rods are manually rotated and hammered. Each piece is unique, and the hammered pattern catches the light and reflects it at different angles, adding to the beauty and charm.

Rolled & Hammered T-Bar Cabinet Pull with Round Rose

FINISHING

Hammered Rectangular Cabinet Handle

Hammered Cabinet Pull

Intricately Hammered Oval Door Knob

Rolled & Hammered Lever Handle

Rolled & Hammered Single Door Pull

Single Hammered Door Pull

Semi Circular Hammered Cabinet Handle

Rolled & Hammered Cabinet Handle

Hammered Cabinet Handle

Pair of Hammered Half Moon Door Pulls

Hammered Rectangular Recessed Pull

Cube Small Intricately Hammered Edge Pull

Rolled & Hammered Pair of Door Pulls

Single Hammered Half Moon Door Pull

Pair of Hammered Door Pulls

Have a general question or need help with a specific project or product? Please contact Joseph Giles by filling out a quick form.

General Enquiry

Our CPD sessions are designed to be delivered face to face, however we will try to accommodate online sessions on a case by case basis.

Book a CPD

All samples supplied will be invoiced and credited in full when returned in fully saleable condition in the original packaging, due to the high value of these products.

Request a Sample

What can we help you with?

email

New form (February 26, 2025 11:32:30 AM GMT)

Register a Project

project_reference_dealers

delivery_deadline

project_address

specifier

If possible, please include the product code, size, finish and quantity.

product_details

Register a Project - Joseph Giles Partner

firstname

lastname

Cabinet & Joinery Hardware - Landing Page Lead Form

i_m_interested_in___

i_am___

company

country

phone

how_did_you_find_us_

message

Joseph Giles is committed to protecting and respecting your privacy, and we’ll only use your personal information to administer your account and to provide the products and services you requested from us. From time to time, we would like to contact you about our products and services, as well as other content that may be of interest to you. If you consent to us contacting you for this purpose, please tick below to say how you would like us to contact you:

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

In order to receive your enquiry, we need to store and process your personal data. If you consent to us storing your personal data for this purpose, please tick the checkbox above and you will then be able to submit this form.

New Site (ON) Contact Us

Shelving System (register interest)

Before we create a trade account for you so you're able to access prices, lead times and technical drawings, we just need some information from you. If you have any questions, please give us a call on +44 (0)20 8680 2602.

jobtitle

company_number_vat_number

company_website

street_address

post__zip__code

New Create Account form (January 8, 2024 3:18:34 PM GMT)

cpd_type

name

address

New Site - Book a CPD

New Shelving System (coming soon) form - landing page

Joseph Giles needs the contact information you provide to us to contact you about our products and services. You may unsubscribe from these communications at any time. For information on how to unsubscribe, as well as our privacy practices and commitment to protecting your privacy, please review our Privacy Policy.

New Site Newsletter Form (ON)

You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.&#xa0;

In order to receive your enquiry, we need to store and process your personal data. If you consent to us storing your personal data for this purpose, please tick the checkbox above and you will then be able to submit this form.&#xa0;

New Site (ON) General Enquiry

Humphrey Munson Design Request

product_type

product_sizes

expected_order_quantities

Please share what you think is a realistic price point per piece.

realistic_price_point

additional_details

Humphrey Munson Design Requests

"Lever Handles for Hotels" - Salto PDF download

project_reference_1

how_soon_do_you_need_your_hardware_

what_is_your_budget_for_hardware_

product_data

New Site (ON) Make An Enquiry 

New Site - Book a CPD - Website Version

subject

Please tell us a bit more about you and why you are interested in joining the team.

content

New Site Careers

slug

download_type

Website Download Form

type_of_enquiry

delivery_country

samples

New Site (ON) Request a Sample

product_code_contact_form_old_site

product_quantity_contact_form_old_site

project_reference

enquiry_details_contact_form_old_site

Contact Us form for Old Website

Textural hardware created through skilled, artisan craftsmanship. 

Rolled & Hammered

Rolled & Hammered Texture - Website Banner Crop

We were inspired by nature to create a design that was tactile and organic. The Rolled and Hammered collection is created using traditional blacksmith techniques: to achieve this beautiful texture, heated brass rods are manually rotated and hammered.

Each piece is unique, and the hammered pattern catches the light and reflects it at different angles, adding to the tactility.

Rolled & Hammered Lever (LV1047) in ageless finishes CMAB, CBB & CSB (2)

The design story

The Rolled and Hammered door lever handles are made from the finest grade solid brass and are carefully hand-finished in all the standard Joseph Giles finishes. All our lever handles come with the unique JG sprung bearing grip tight inner roses. *Pair of lever handles includes:<ul><li>One pair of lever handles (two pieces, 1 left-handed and 1 right-handed)
</li><li>One pair of decorative cover roses (four pieces, two plates which fix to the door, and two covers)
</li><li>One pair of unique JG sprung bearing grip tight inner roses** (two pieces, 1 left-handed and 1 right-handed)
</li><li>One set of fixings for lever handles which include screws, bolt through fixings, washers, grub screws, allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick</li></ul> *Levers are also available as single handles (left-handed or right-handed).&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the sprung bearing grip tight rose because of its superior performance. For technical help regarding lever handles, please refer to our technical help sheet below. <span style="color: rgb(33, 37, 41); font-family: Aptos, sans-serif; font-size: 18.6667px; font-style: normal; font-weight: 400; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; background-color: rgb(255, 255, 255); display: inline !important; float: none;">®&nbsp;Design registered - registration numbers&nbsp;002602623-0002 and 90026026230002.

These intricately hammered doorknobs are made of the finest grade solid brass and are available in all the standard Joseph Giles finishes. Our doorknobs are supplied with the unique JG bearing grip tight inner rose system. *Pair of doorknobs includes:<ul><li>One pair of doorknobs (two pieces)
</li><li>One pair of decorative cover roses (two pieces)
</li><li>One pair of unique JG bearing grip tight inner roses** (two pieces)
</li><li>One set of fixings which include screws, bolt through fixings, washers, grub screws, allen key, and an 8mm (5/16) spindle to suit doors up to 54mm (2.12”) thick</li></ul> *Doorknobs are also available as single handles.&nbsp; **View our Rose Mechanism Options booklet in the downloads section below for other types of inner roses available for specialist applications. Note that we strongly recommend the bearing grip tight rose because of its superior performance. We recommend that our doorknobs are fitted with horizontal locks and latches to ensure the best operation.For further technical help regarding doorknobs, please refer to our technical help sheet below.

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied as a pair for either glass or timber doors (a single-sided version is also available).&nbsp;The standard back-to-back fixings for timber doors will suit doors up to 54mm (2.12”) thick.The standard back-to-back fixings for glass doors will suit doors 10-12mm thick.&nbsp;Please see our help sheet below for more technical information.&nbsp;Included in a pair of back-to-back pull handles:<ul><li>2no Door pull handles</li><li>1no Fixing pack with specialist bolts, grub screws and an allen key</li></ul>

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied individually for single-side applications.&nbsp;The standard bolt-through fixings for timber doors will suit doors up to 54mm (2.12”) thick.The standard bolt-through fixings for glass doors will suit doors up to 10-12mm thick and will come with two cover caps.&nbsp;Included in a single-sided pull handle for timber doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li></ul>&nbsp;Included in a single-sided pull handle for glass doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li><li>2no Cover caps for the push side</li></ul>&nbsp;Please see our help sheet below for more technical information.

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied individually for singleside applications.&nbsp;The standard bolt-through fixings for timber doors will suit doors up to 54mm (2.12”) thick.The standard bolt-through fixings for glass doors will suit doors up to 10-12mm thick and will come with two cover caps.&nbsp;Included in a single-sided pull handle for timber doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li></ul>&nbsp;Included in a single-sided pull handle for glass doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li><li>2no Cover caps for the push side</li></ul>&nbsp;Please see our help sheet below for more technical information.

Our door pull handles are made from finest grade solid brass and are available in all our signature finishes.&nbsp;They come with a 10-year mechanical guarantee and under this code they are supplied individually for single-side applications.&nbsp;The standard bolt-through fixings for timber doors will suit doors up to 54mm (2.12”) thick.The standard bolt-through fixings for glass doors will suite doors up to 10-12mm thick and will come with two cover caps.&nbsp;Included in a single-sided pull handle for timber doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li></ul>&nbsp;Included in a single-sided pull handle for glass doors:<ul><li>1no Door pull handle</li><li>1no Fixing pack with specialist bolts</li><li>2no Cover caps for the push side</li></ul>&nbsp;Please see our help sheet below for more technical information.

This beautiful hammered recessed pull is available in two sizes and all our signature finishes and has been designed to be used on sliding doors. We strongly advise that you check the door thickness before ordering or specifying, especially if they are being installed back to back as a minimum door thickness of 44mm is required. Please be advised that these products need to be bonded to the door. This product has passed an installation strength test when fitted with Evo-stick mirror adhesive, however, we have not tested this product and adhesive on every possible door substrate and situation, and so we would recommend undertaking your own tests prior to installation, including Evo-stick mirror adhesive.&nbsp;

Door Hardware

Finest grade solid brass cabinet handle from the Rolled &amp; Hammered collection, made and finished by hand. These handles are available in three sizes and in all our signature finishes. They are supplied as single items with solid brass M4 fixing bolts (FT1030) in a matching finish.

Our Rolled &amp; Hammered cabinet pulls are handmade from the finest grade solid brass using traditional blacksmith techniques. They are available in all our signature finishes. They are supplied as single items with solid brass M4 fixing bolts (FT1030) in a matching finish, and an anti-rotation pin.

Handmade solid brass cabinet handle with a beautiful hammered surface. These handles are available in two sizes and in all our signature finishes. They are supplied as single items with solid brass M5 fixing bolts in a matching finish. **Please note, due to the way this product is assembled, there may be small marks or imperfections where each leg is attached. This is most noticeable on plated finishes**

Handmade solid brass cabinet pulls with a beautiful hammered surface. These are available in two sizes and in all our signature finishes. They are supplied as single items with solid brass M5 fixing bolts in a matching finish.

Handmade solid brass semicircular cabinet handle with a beautiful hammered surface, available in four sizes and all our signature finishes. They are supplied as single items with solid brass M5 fixing bolts in a matching finish.

Handmade solid brass cabinet handle with a beautiful hammered surface. They are available in two sizes and all our signature finishes. They are supplied as single items with solid brass M5 fixing bolts in a matching finish.

The solid brass edge pull is a discreet handle that is recessed into the top or side edge and the back of a cabinet door/draw and screw fixed from the back. These small-size (45mm projection) edge pulls can comfortably be used on doors/drawers up to 22mm thick. Available in three standard lengths, bespoke lengths can also be provided. For longer lengths (anything over 150mm), we strongly recommend that the weight of the handles and the impact this will have on the hinges is carefully considered. Supplied as single items with solid brass slotted woodscrews that are finished to match the edge pull. **Please note that Joseph Giles cannot guarantee that the longer edge (that incorporates the grip) on our edge pulls will be exactly 90 degrees – this is due to the extrusion manufacturing process and is particularly important if the pulls are being fitted side by side, the handles will tend to curl slightly away from each other**

Product Category