PV1011 - Joseph Giles
PV1011.07_PN_COVER
PV1011.07_DBZW_COVER
PV1011.01_BN_COVER
PV1011.01_DBZW_COVER
PV1011.01_PN_COVER
PV1011.07_BN_COVER
PV1011_BBW_White
PV1011_Finishes_Group
PV1011_MABW_Group
PV1011.01_03_06_Group
PV1011_ABCdims
PV1011_MABW_02_White
PV1011_BBW_02_White
PV1011_DBZW_White
PV1011_DBZW_02_White
PV1011_BN_White
PV1011_MABW_White
PV1011_BN_02_White
PV1011_MABW_Black
PV1011.07_PN_COVER
PV1011.07_DBZW_COVER
PV1011.01_BN_COVER
PV1011.01_DBZW_COVER
PV1011.01_PN_COVER
PV1011.07_BN_COVER
PV1011_BBW_White
PV1011_Finishes_Group
PV1011_MABW_Group
PV1011.01_03_06_Group
PV1011_ABCdims
PV1011_MABW_02_White
PV1011_BBW_02_White
PV1011_DBZW_White
PV1011_DBZW_02_White
PV1011_BN_White
PV1011_MABW_White
PV1011_BN_02_White
PV1011_MABW_Black

PV1011: Floor & Frame Pivot with Double Way Arm Set

PRODUCT STORY

Pivots provide an alternative way to swing a door as opposed to a traditional butt hinge. They can provide a more minimalist aesthetic than a traditional hinge and are also very useful for certain specialist applications.


This pivot comes with specially fabricated brass plates, to ensure that any visible parts will match with the finish on other JG hardware in the vicinity. 

YOUR CONFIGURATION: PV1011

PV1011

- 1 +

Available Finishes

DETAILS

Floor pivot set with heavy duty bearing technology available for both single and double action doors. This pivot set does not have a self-closing function, however, is designed for free swing door sets. The PV1011 is Certifire approved (FD30) and is mechanically guaranteed for 10 years.


Normally used in applications where doors are very heavy or traditional butt hinges cannot be used because of a bespoke frame detail. These pivots are designed to be hidden within the thickness of a 44mm door when the door is closed. A recess of 15mm is required below the floor surface. 


The ‘heel’ side of the door will need to be radiused slightly to ensure the door edge clears the frame when pivoting back and forth, this is standard for double action pivot doors.


These pivot sets will suit doors that:

  • Weigh up to 400kg
  • Are a minimum 44mm thick
  • Are a maximum of 1800mm wide


Included:

  • Floor mounted pivot inc pivot
  • Specially fabricated brass cover plates
  • Double action top centre, upper and lower portions
  • Double action bottom strap
  • Fixings pack


Different height spindle extensions between 5mm and 50mm are available if the floor pivot part is being fitted underneath a floor substrate – these spindles cannot be changed on-site.

WE USE COOKIES ON THIS SITE TO ENHANCE YOUR USER EXPERIENCE